BorMann BCR2050, Инструкции

Страница: 3 / 5

Dele ng a single bu on code on a radio controlled receiver:
1. Press the desired bu on on the radio controlled receiver and hold for about 3 seconds before releasing it. The func on light will fl ash for about 30 seconds
(learning mode).
2. To delete a bu on code from a radio controlled receiver, press the remote control OFF bu on you wish to delete while the light fl ashes (learning mode). The
delete ac on is acknowledged with about 3 seconds of rapid fl ashing.
Note: The radio controlled receiver will remain in learning mode for another 30 seconds or so.
Manual Switching
The radio controlled receiver may be switched on or off manually by briefl y (less than 1 second) pressing the bu on on the receiver. The func on light indicates the
switching state of the radio controlled receiver.
CLEANING
MAINTENANCE
Check the ba ery for damage periodically.
Cau on! Risk of electric shock.
Disconnect the device from the power source prior to cleaning. Clean the device with a so , slightly damp cloth and a mild cleaner.
Make sure the device is completely dry before using it again.
Ba eries and rechargeable ba eries may not be disposed of in household waste! As a consumer, you are legally obligated to dispose of all ba eries
and rechargeable ba eries at a collec on point in your community/your district or in trade so that they can be supplied for environmentally friendly
disposal, otherwise there are possible risks to the environment and human health.
DISPOSAL
Always dispose of electrical appliances in an environmentally responsible manner!
Do not dispose of electrical appliances with the household rubbish!
In accordance with Direc ve 2012/19/EC on waste electrical and electronic equipment used electrical equipment must be separated from the rubbish
and reused or recycled in an environmentally responsible manner. Please contact your local authori es for available disposal op ons for your disused
device.
* The manufacturer reserves the right to make minor changes to product design and technical specifi ca ons without prior no ce unless these changes sig-
nifi cantly aff ect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also
concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applica ons. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspec on, repair or replacement work, including maintenance and spe-
cial adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Opera on of the product with non-provided equipment may cause malfunc ons or even serious injury or
death. The manufacturer and the importer shall not be liable for injuries and damages resul ng from the use of non-conforming equipment
3.