BorMann 043195, Руководство пользователя, Страница: 3 / 10

EN
WWW.BORMANNTOOLS.COM
3
Symbols - Pictograms
WARNING – To reduce the risk of injury, user must read instruction manual. Double insulation.
Environmental Protection
Waste electrical products should not be disposed of with house hold waste,
Please recycle where facilities exist. Check with your local Authority or retailer
for recycling advice.
Technical data
INPUT POWER: 1500W
NO-LOAD SPEED: 0- 920 rpm
IMPACT RATE: 0-4100bpm
IMPACT ENERGY: 5.5J
CHUCK TYPE: SDS PLUS
WEIGHT: 4.60kg
DRILLING CAPACITY: - MASONRY Ø36mm
- STEEL Ø13mm
- WOOD Ø40mm
* The manufacturer reserves the right to make minor changes to product design and technical specifications without
prior notice unless these changes significantly affect the performance and safety of the products. The parts described /
illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's
product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replace-
ment work, including maintenance and special adjustments, must only be carried out by technicians of the authorized
service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may
cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries
and damages resulting from the use of non-conforming equipment.
Intended Use
The machine is intended for hammer drilling in concrete, brick and stone. It is likewise suitable for drilling without impact in wood, metal, ceramic and plastic.
The tool is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.
Description of main parts
1. SDS-plus chuck
2. Tool holder (SDS-plus)
3. Dust protection cap
4. Locking sleeve
5. Depth gauge
6. Auxiliary handle
7. Operational mode selection switch
8. On/Off switch
9. Rotary Switch with Speed Control
Not all the accessories illustrated or
described included in standard delivery.
8
7
4
3
2
1
6
9
5