BorMann 037378, Руководство пользователя

Страница: 5 / 32

EN
WWW.BORMANNTOOLS.COM
5
- DO NOT lean over the barbeque when igniting the gas flame. Close the valve on the gas bottle after each use: (Turn the valve clockwise). Also turn off the
control knobs (Turn knob fully clockwise).
- Never leave the hot barbeque unattended. If the flame extinguishes, relight immediately or cut off the supply from the gas bottle.
- When connecting the gas bottle, ensure that there are no ignition sources within a 5m radius. Take special care not to light any naked flames, do not smoke
or switch on electric appliances (devices, lights, door bells), etc (sparkover possible).
- Before each use, check to ensure that all connections through which gas is supplied are sealed and intact.
- If necessary, ensure that you replace the hose to meet with national requirements. (Always use hose-clips to secure the hose to the regulator and BBQ).
- If the connections for the gas supply are porous or faulty, the barbeque must not be used. This also applies, for example, to hoses or fittings that may have
become blocked, as this can lead to a dangerous flashback.
CAUTION! GAS DISPLACES OXYGEN
Liquid gas is heavier than oxygen. Therefore it settles on the ground and displaces the oxygen at that level.
Possible consequences:
- Suffocation resulting from a lack of oxygen if the gas concentration is allowed to rise sufficiently. Do not use the barbeque unless it’s completely assembled
and all parts are securely fastened and tightened.
- Do not leave a lit barbeque unattended, especially keep children and pets away from barbeque at all times.
- Do not move the appliance during use.
- Never cover the entire cooking area.
- Never obstruct the ventilation openings of the cylinder compartment.
- Do not use power tools to construct this product.
- Do not over tighten screws or bolts.
- Do not sit or stand on the product.
- Do not use this product if parts are missing, damaged or worn.
- Never use scourers, abrasive or chemical cleaners.
Assembly
- Please read these instructions carefully before assembly and use. Caution: Whilst every effort has made in manufacture of your barbeque to remove any
sharp edge
s
, you should handle all components with care to avoid accidental injury.
- Please use protective gloves when assembling this product.
- Assembly of the barbeque involves many large components; it is advisable to have two people assemble the unit. When you are ready to start, make sure that
you have the right tools, plenty of space and a clean, dry area for assembly.
- To avoid losing any small component or hardware, assemble your product on a hard level surface that does not have cracks or openings.
- To avoid damage to soft floor or carpet, do not assemble or move the appliance on soft floor or carpet.
- Check the pack and make sure you have all the parts listed.
- Please refer to the parts list and assembly diagram as necessary. During assembly children should be kept away from the product due to possible risk of injury.
- Make sure all the plastic protection rip off before assembling. Follow all steps in order to properly assemble your product.
- Do not force parts together as this can result in personal injury or damage to the product.
- When applicable, tighten all hardware connections by hand first, once the step is completed, go back and full tighten all hardware.
- Ensure that this product is fully assembled as illustrated before use.
Number of people required to assemble
Two people to assemble and lift.
Time to assemble
Tools required
Technical Data
Model BBQ5500 Burner Gas Grill 4 + 2, without gas regulator
Total Power 22,5 kW
Main burner 4 x 4,1 kW
Left infrared burner 1 x 2,6 kW
Right side burner 1 x 3,5 kW
Cooking height 92 cm
Main cooking area 71 x 49,5 cm
Total cooking area 3710 cm
2
Flame tamer SUS, 4 pcs
Ignition System Piezo
Product Size 151,8 x 62,5 x H124 cm
Category : I
3B/P(50)
Gas & Pressure: G30 Butane and G31 Propane at 50 mbar
1
Category : I
3B/P(30)
Gas & Pressure: G30 Butane and G31 Propane at 30 mbar
2
Category : I
3-(28-30-37)
Gas & Pressure: G30 Butane at 28-30 mbar and G31 Propane at 37 mbar
3
Hood construction: double layer, S/S upper layer S/S handle, with a temperature gauge, S/S control panel,
Side table: S/S with slide out lid, Cabinet: two S/S front doors, powder coated side / rear panels, 4 swivel
casters. Removable grease tray.
1: AT, CH, DE, SK
2: CY, FR, IT, GB, NO, NL BG
3: BE, CH, CY, CZ, GR, FR, ES, IT
CAUTION: USE OUTDOORS ONLY, If stored indoors, detach and leave cylinder
outdoors. Minimum clearance from side and back of unit to combustible
construction : 100 cm. Hot parts. Keep children away.