BorMann 032700 Скачать руководство пользователя страница 5

EN

WWW.BORMANNTOOLS.COM

5

Warning!

• Check the status of the charger and battery before each charge. If there is any indication of a fault then do not continue, seek advice from an authorized 

vendor.

Battery pack efficiency and charging advice 

Recharge the battery packs before they become completely exhausted 

When you feel that the power of the tool becomes weaker, stop using the tool and recharge the battery packs. If you continue to use the tool and exhaust the 

electric current, the battery pack may become damaged. 

Avoid recharging at high temperatures. A rechargeable battery pack will be hot immediately after use. If such a battery pack is recharged immediately after 

use, its internal chemical substance will deteriorate, and the battery life will be shortened. Leave the battery pack and recharge it after it has cooled for a while. 

The battery pack should only be used and/or charged when battery pack temperature is between 50C and 300

C. 

The battery pack needs to be warmed-up or cooled down in order to prevent damage to the batteries internal components. 

Note: Failure to warm up or cool down a battery pack could result in serious damage to tie battery, charger and user. 

Maintenance

Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your tool in good working condition.  The motor must be 

correctly ventilated during tool operation. Avoid blocking the air inlets and vacuum the ventilation slots regularly. 

WARNING: Always remove the rechargeable battery from the device before all work.

• Replace all damaged or worn parts to ensure the

 

power tool

 

is always ready for safe operation.

• Clean ventilation slots and openings with a brush.

• DO NOT use any solvents or cleaning agents containing chemicals which could damage the plastic parts. Wipe the housing clean with a cloth.

• Always store the leaf blower in a dry, frost-free location beyond the reach of children.

• Store and charge your rechargeable batteries at a cool location. Temperatures above or below normal room temperature shorten the lifespan of the recharge

-

able batteries.

• Do not store rechargeable batteries when discharged. Wait until the rechargeable battery has cooled down and charge it completely.

• Rechargeable batteries gradually lose their charge. The higher the temperature, the quicker they lose their charge. For longer storage periods, recharge the 

rechargeable battery every one or two months. This will extend the lifespan of the rechargeable battery.

Maintenance and Troubleshooting

Troubleshooting

Problem

Possible Cause

Remedy

Unit does not start

Battery not installed properly

The battery is not charged

Check battery installation

Check battery charging requirements

The battery will not charge

The battery is not inserted to the charger

 Connect the battery to the charger 

The charger is not connected to the socket 

Connect the charger into a working outlet. 

Check current at receptacle by plugging in a lamp or other 

appliance

Check whether receptacle is connected to a light switch which 

turns power off when you turn out the lights

The air temperature is too high or too low

Attempt to charge the battery in a room where the surrounding  

air temperature is above 4,5 oC or below + 40,5 oC

Important: Please note, all repairs/service should be carried out by a qualified person.

Содержание 032700












Отзывы: