BorMann 030386, Руководство пользователя

Страница: 3 / 15

EN
WWW.BORMANNTOOLS.COM
3
Safety Instructions
● Remove the packing and make sure that the appliance is intact. In case of doubt do not use the appliance and contact a qualified technician to have the
unit checked. Do not leave packaging materials like bags and staples within reach of children.
● Before switching on the appliance check if the electrical voltage and frequency of the circuit correspond to those indicated on the appliance.
● The appliance has to be connected to a circuit according to the rules in force concerning the civil plant. The plant has to be related to the nominal power of
the appliance and has to be provided with an earth-wire.
● Use the appliance only for the mentioned purpose, namely as a heater for domestic use.
● Do not use it for any other purpose as it could get dangerous.
● The distributor is not responsible for any eventual damages caused by improper or faulty use.
● The use of every electrical appliance calls for the awareness of some basic rules, such as:
● Never touch the appliance with wet or damp hands or feet.
● Never expose the appliance to atmospheric conditions (rain, sun, etc.).
● The appliance must be always placed on a flat and stable surface
● Switch the appliance off and unplug it before cleaning.
● When the appliance is not in use, switch it off and unplug it.
● Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
● Do not put the cable on the appliance when it is still warm.
● The heater must be insta1led and kept vertically.
● Do not switch on the heater near furniture, curtains, shelves, etc.
● Do not use the appliance near liquids or inflammable matters.
● Do not locate the heater immediately below a socket outlet.
● Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if heater is covered or
positioned incorrectly
● Do not cover the appliance when it is running to avoid overheating risks.
In case the power cord is damaged, do not try to fix it yourself. Show it to a qualified technician.
● Children, old people and disabled people are not often aware of the dangers, which can derive from improper use of the appliance. The appliance should
never be used without an adult supervision.
● Do not connect the appliance to extension cords or multiple outlets.
● Do not damage and do not link the power cord.
Before using this appliance, it must have the castor plates and castors fitted. The wings nuts will be screwed to the posts on the underside of the heater.
Assembly
Carefully turn the Main Body upside-down on a scratch free and stable surface. Be careful to prevent damage to the cosmetic finish or your floor surfacing.
Connect the castors onto the posts on the wheel plates and press on until the click into position. This can take some force.
Secure the wheel plate to the bottom of the heater by using the wing nuts. Return the appliance to upright position.
WARNING: Operate the appliance in normal upright position only with wheel assemblies attached to the bottom. Any other position could create a hazardous
situation.
Operating your Heater (BEH6100-BEH7200)
Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use.
Please follow the instructions below.
WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNING: Keep all objects at least 1 meter from the front, sides and rear of the appliance.
WARNING: Do not use this heater with a programmer, separate timer, remote control system or any other device that switches the heater on automatically,
since a fire risk exists if the heater is covered or positioned incorrectly.
WARNING: Never leave the heater unattended when in use. Ensure that the heater in on a flat, stable, heat-resistant surface. Once the heater is in a safe op-
erating position and all switches are off, insert the power plug into the mains outlet and switch on.
CAUTION: Ensure the power cord is not tightly stretched because if pulled out by force it may partially pull the plug from the socket. A partially inseted plug
will overheat the plug and socket and could result in fire.
Heat Control Switch
The control switch positions are: “I” = Low Heat “II” = High Heat
Check that the heat control switch is set to OFF position before plugging the heater into the mains supply. For greater economy, use the Hight Heat setting
initially and then switch to the Low Heat setting.
* The manufacturer reserves the right to make minor changes to product design
and technical specifications without prior notice unless these changes significantly
affect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other
models of the manufacturer’s product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all
repair, inspection, repair or replacement work, including maintenance and special
adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.
Technical Data
Model: BEH6100 BEH7200 BEH7300
Voltage/Frequency: 220-240V/50-60Hz 220-240V/50-60Hz 220-240V/50-60Hz
Power: 1100w/2200w 1100w/2200w 1100w/2200w
Heating element
type:
Four tubes quartz
heating element
Four tubes quartz
heating element
Four tubes quartz
heating element
Additional Features: Tip-over switch Tip-over switch
LCD display, timer
function, remote
control, tip-over
switch
Outdoor use
Outdoor use