
EN
WWW.BORMANNTOOLS.COM
3
3. Hang the motor on the suspension for wiring. The remote control receiver connects the motor
power line: the black wire L of the motor is connected in the black wire of the remote control
receiver terminal, the blue wire L-LIHT of the motor is connected in the blue-black wire of the remote
control receiver terminal, and the white wire N of the motor is connected in the white wire of the
remote control receiver terminal.
4. The remote control receiver is placed in the suction cup, and then fastening connection between
motor and suspension.
5. Connect the fan blade and fork, fasten on the motor
6. The lamp is connected with the motor, and the fast terminal is used to connect the
lamp.
7. Install E27 40w bulb and glass at last.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may
also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is
used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and
special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Model:
BFN6100
BFN6200
BFN6300
Voltage/Freq:
220V/50Hz
110V/60Hz
220V/50Hz
110V/60Hz
220V/50Hz
110V/60Hz
Power:
50W
50W
50W
Bulb Holder Type:
E27
E27
E27
Diam:
107cm
76cm
107cm
Technical Data