BorMann 023890, Руководство пользователя, Страница: 6 / 13

6
www.BormannTools.com
Use
Mounting the Nozzle for Blowing Operations (Fig. A)
•
Insert the pin located inside the Nozzle into the notch provided on the Blast Port (1).
• To lock Nozzle in place, turn the Nozzle in the direction indicated.
• To remove Nozzle, turn the Nozzle in the opposite direction.
Mounting the Nozzle and Dust for Dust Collection (fig. B)
• For dust collection, mount the Dust Bag at the Blast Port (2) and Nozzle at the suction Port (6).
•
To remove Dust Beg and Nozzle, simply pull out by first turning in the opposite direction.
• Empty the Dust Bag frequently to ensure maximum dust collecting efficiency.
• Adjust Variable Speed Knob (4) marked with “MIN” & “MAX” for different speed requirement.
•
When continuous operation is required, first depress the switch and then the lock-on button (5) and release to disengage
lock, squeeze and release switch. Warning: Continuous running of machine should not exceed 30 minutes.
Replacing Carbon Brushes (fig. D)
•
Use a screwdriver to remove the brush holder cap.
• Take out the worn carbon brush, insert the new one and secure the brush hold cap.
Warning! Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
Accessories
The performance of your tool depends on the accessory used. The manufacturer’s accessories are engineered to high quality
standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from
your tool.
Maintenance
Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and unplug the tool.
•
Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
Technical Data
Voltage/frequency: 230V-50HZ
Input power: 400W
No load speed: 14000RPM
Max air volume: 3.3M 3
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior
notice unless these changes significantly affect the performance and safety of the products. The parts described /
illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's
product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement
work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.