8
www.BormannTools.com
WARNING! This machine produces an electromagnetic field during operation. This field may under some circumstances
interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with
medical implants to consult their physician and the medical implant manufacturer before operating this machine.
3
、
DESCRIPTION
Suggestion: 1) wear glove during operation
2) limit operating time and shorten trigger time
5
、
MOUNTING A SANDING BELT
Warning: Always disconnect the device before performing any adjustment or maintenance operation.
Pull the clamping lever out and turn it as far as it will go.
1. Take a sanding belt of the required grain size and place it on the rollers. Make sure that the arrow on the inside of the
sanding belt points in the same direction as the arrow on the machine.
2. Make sure that the sanding belt is straight and centred on the roller.
3. Push the clamping lever back.
4. Switch the machine on to let the sanding belt run. With the machine switched on, turn the belt centring knob until the
sanding belt keeps running straight.
6
、
USING THE DUST EXTRACTION OUTLET
In combination with the dust bag or an external dust extractor, the dust extraction outlet keeps dust away from the sanding
surface.
7
、
SWITCHING ON AND OFF
1. To switch on the machine press the on/off switch.
2. To switch off the machine, release the on/off switch.
3. To switch the machine to continuous mode, you keep the on/off switch fully pressed and simultaneously press the lock
button, then subsequently release the on/off switch.
To switch off continuous mode, press the on/off switch again.
Technical Data
Voltage / Frequency:
230V-50HZ
Input Power:
800W
Sander Speed:
380M/MIN
Sander Belt size:
533*76MM
1. On/Off - switch
3. Dust extraction outlet
5. Belt centring knob
7. Dust bag
2. Lock on button
4. Belt rollers
6. Clamping lever
The sanding belt must be fitted firmly on the sanding pad and should not come
loose.
Содержание 022961
