BorMann 022749, Руководство пользователя, Страница: 9 / 17

3
www.BormannTools.com
Equipment maintenance — The wrong or inappropriate equipment maintenance can cause injury or death. So:
1. The licensed people can do assembly, maintenance and some other operation.
2. The power source shall be turned off when any maintenance work in the power source needed.
3. Ensure that the cable, earth wire, connector, main lead and power supply are in the normal work.
4. Do not abuse equipment and firing.
5. Keep the safe equipment and cabinet dos shall in peace and good condition.
6. Do not change any equipment.
The sign used in the manual means: take care! On guard! Involve your personal safety.
DANGER!
Means sudden danger: It can get people injured or dead if it is inevitable.
WARNING! Means potential danger, it also get people injured or dead.
CAUTION! Means danger, it can get people injured
Produce application
The MIG welding machine adopts special tapped transformer adjusting style. It is an industrial product, it has wire – feed
system, small volume, easy to shift and simple operation, it can be used for welding low carbon steel, low alloy steel etc.
Voltage characteristic and current characteristic of welding power source
The curve (as diagram 1-1) means V-A external static characteristic of welding power, gradient of cure named slope, normal
means ‘’drop of voltage per 100A’’. The curve shows the output voltage we can get in any preset output current because the
V-A slope is fixed.
Technical Data
Voltage/Frequency:
230V – 50Hz
Max no load voltage: 30V
Current Range: 45 – 130A
Duty Cycle:
130A@10%
Flux Cored wire size: 0.6-0.9MM
Protection Class: IP21S1