BORLA PERFORMANCE INDUSTRIES
5901 Edison Dr.
Oxnard, Ca. 93033
TITLE: 07 Dodge Caliber R/T Installation
Instructions
PART NO. A-35390
Page 1 of 4
2007 Dodge Caliber R/T
Exhaust System Installation
Thank you for purchasing a Borla Performance Cat-Back™ Exhaust System.
Borla Performance Cat-Back™ Exhaust System (Part number 140221) has been designed for the 2007
Dodge Caliber R/T equipped with 2.4L 4 cylinder engine, All-wheel drive and automatic or manual
transmissions. Borla Performance Cat-Back™ Exhaust System (Part number 140250) has been de-
signed for the 2007 Dodge Caliber R/T equipped with 2.4L 4 cylinder engine, Front-wheel drive and
automatic or manual transmissions.
Borla Performance Industries recommends that an exhaust shop or professional after market parts installer, who has all the necessary
equipment, tools and experienced personnel needed for proper installation, should perform the installation of this system. However,
if you decide to perform the installation, we recommend someone should help you. Ensure the installer uses all under car safety pre-
cautions including eye protection.
Please take time to read and understand the following…
By installing your Borla Performance Exhaust System, you indicate that you have read this document and you agree with the terms
stated below.
It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your
Borla Performance Exhaust System
Borla Performance Industries assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper
operation, lack of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturer’s prod-
ucts and/or systems.
Included with your Borla Performance Exhaust System is a warranty card. Please read it carefully before you begin any work on
your vehicle. If you should have any questions regarding our warranty policy, installation, or any other matter pertaining to your
new Borla Performance Exhaust System, please give us a call at the number provided on the warranty card.
Precision manufactured using aircraft quality T-304 stainless steel; this system is designed to endure years of heavy use. Install-
ing a Borla Performance Exhaust System on your vehicle will eliminate the restrictive design of the stock exhaust, allowing your
engine to discharge exhaust gas easier. The result is more horsepower and torque, longer engine life, and a distinctive throaty
growl- all this, with easy bolt-on installation. These installation instructions have been written to help you in the installation of
your Borla Performance Exhaust System. Please read it completely before installing your system.
