manualshive.com logo in svg

Borg & Overstrom b5, Инструкция по установке и эксплуатации, Страница: 3 / 32

Поделиться
Скачать
Borg & Overstrom b5 Скачать руководство пользователя страница 3

Install & Operation Manual

Borg & Overström

GB

3

Controls

Factory set to:

Cold Thermostat

NB: Turn clockwise to decrease water temperature

-C

+C

Chilled

On/Off Switch: at upper rear of machine, 

switches cooling operation on/off.

Cold Thermostat: at rear of machine.

Cold Button: press to dispense cold water.

Green LED (Top): Colours to show cooling 

operation is switched on.

Green LED (Bottom): Colours to show when 

compressor is operating/water is above set 

point.

10A Fuse: On rear of machine, integral with 

IEC socket.

Ambient

Ambient Button: Press to dispense ambient water.

Sparkling

Soda: Switches sparkling operation on/off.

Sparkling Button: Press to dispense sparkling water.

Yellow LED (bottom RH): Colours to show the 

sparkling operation is switched on.

Hot

On/Off Switch: The hot water heating mode is 

controlled by a switch on the back of the unit, 

next to the cooling mode switch. This switch is 

labelled “Hot”.

Hot Thermostat: regulated by a pre-set, non-

adjustable sensor on the tank.

Hot Button: press to dispense hot water.

Lock Button: toggles on and off the dispense of 

hot water.

Red LED (on hot water icon): Colours to show 

heating mode is enabled.

Red LED (marked heating): Colours to show 

heating element is active according to 

thermostatic demand.

Содержание b5

































Отзывы:

Нет отзывов