BORETTI ML9016GSAN, Руководство пользователя

Страница: 10 / 67

10
Fitting the adjustable feet
The adjustable feet must be fitted
to the base of the cooker before
use (fig. 1.2). Rest the rear of the
cooker on a piece of the polystyrene
packaging exposing the base for the
fitting of the feet.
Fit the 4 legs by screwing them tight
into the support base as shown in
figure 1.3.
Fig. 1.2
Levelling the cooker
The cooker may be levelled by screwing the lower ends of the feet IN or
OUT (fig.1.4)
Fig. 1.4
Fig. 1.3
Backguard
Before installing the cooker,
assemble the backguard “
C ” (fig. 1.5).
* The backguard “ C ” can be found
packed at the rear of the cooker.
* Before assembling remove any
protective film/adhesive tape.
* Remove the two spacers “ A ” and
the screw “ B ” from the rear of the
cooktop.
* Assemble the backguard as shown
in figure 1.5 and fix it by screwing
the central screw “
B ” and the
spacers “ A ”.
C
B
A
Fig. 1.5
EN
Bor
etti Milano / User guide - Installation advice