BOS1901-KIT
User Guide
BOS1901CDK01.2
© All rights reserved 2019 Boréas Technologies Inc
26
9
FAQ and Troubleshooting
Please refer to Boréas website for FAQ and Troubleshooting information, which will be maintained
throughout the BOS1901-KIT lifecycle. It will also contain application note documents that will be helpful
for the user writing his/her own code to operate the BOS1901.
10
Notice and Warning
Danger High Voltage!
Electric shock possible when connecting board to live wire. Board should be handled with care by a
professional. For safety, use of isolated test equipment with overvoltage and/or overcurrent protection
is highly recommended.
This product uses semiconductors that can be damaged by electrostatic discharge (ESD). When handling,
care must be taken so that the devices are not damaged. Damage due to inappropriate handling is not
covered by the warranty.
The following precautions must be taken:
-
Do not open the protective conductive packaging until you have read the following and are at
an approved anti-static work station.
-
Use a conductive wrist strap attached to a good earth ground.
-
If working on a prototyping board, use a soldering iron or station that is marked as ESD-safe.
-
Always disconnect the microcontroller from the prototyping board when it is being worked on.
-
Always discharge yourself by touching a grounded bare metal surface or approved anti-static
mat before picking up an ESD - sensitive electronic component.
-
Use an approved anti-static mat to cover your work surface.