Boreal Brisa BRS12HPL1IA, Руководство пользователя

Страница: 38 / 44

Installation of indoor unit
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
with wire clip.
Outdoor unit connection
Put wiring cover back and then tighten the screw.
5.
● For the air conditioner without plug, an circuit break must be installed in the line.
3 4
cable-cross
hole
power connection
wire
09K
、
12K
、
18K
、
24K:
3
red
(brown) (yellow-
green)
4.
Note:
●
Close the panel.
All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.
The circuit break should be all-pole parting and the contact parting distance
should be more than 3mm.
N(1) 2
white black
green
(blue)