Boreal Brisa BRS09HPL1IA/OA, Руководство по обслуживанию

Страница: 67 / 82

64
Installation and Maintenance
Service Manual
a
c
d
b
First remove the left side of the evaporator
from the groove of bottom case and then
remove the right side from the clasp on
the bottom case.
Instruction: Some wiring terminal of this
product is with lock catch and other devices.
The pulling method is as below:
①
Remove the soft sheath for some terminals
������������������������
terminals.
②
Pull out the holder for some terminals at
�����������������������
terminal), hold the connector and then pull the
terminal.
Circlip
Soft sheath
Holder
Connector
Procedure Steps
������������������� .
9. Remove evaporator assy
Screws
Connection pipe clamp
Evaporator assy
Evaporator assy
Screw
Groove
Bottom case
Clasp
Connection pipe
At the back of the unit, remove the
screw ���= connection pipe clamp and
then remove the connection pipe clamp.
Adjust the position of connection pipe
on evaporator slightly and then lift the
evaporator upwards to remove it.