119
Cleaning and maintenance
www.bora.com
EN
Removing the air inlet nozzle
1
2
Fig. 8.1
Removing air inlet nozzle
[1]
Air inlet nozzle
[2]
Access opening
Prerequisite:
The fan level indicator shows
0.
X
Reach into the access opening [2] of the air inlet
nozzle [1] with your finger.
X
Pull the air inlet nozzle [1] up and out.
Removing the stainless steel grease filter
3
2
1
Fig. 8.2
Removing the stainless steel grease filter
[1]
Stainless steel grease filter
[2]
Handle
[3]
Inlet opening
X
Take hold of the stainless steel grease filter by the
handle [2].
X
Pull the stainless steel grease filter [1] up and out
of the suction opening [3].
Heavy soiling
X
Remove heavy soiling and marks (limescale
marks, mother-of-pearl-like shiny marks) using
cleaning products while the cooktop is still warm.
X
Wipe off any food that boils over with a damp
cloth.
X
Remove any remaining dirt with the glass ceramic
scraper.
X
Always remove any seeds, crumbs or similar that
fall onto the cooktop during cooking immediately
to prevent the surface getting scratched.
Any changes in colour or glossy spots do not mean
that the cooktop is damaged. They do not affect the
functionality of the cooktop or the stability of the
glass ceramic panel.
Changes in the colour of the cooktop are the result
of residues which have not been removed and have
burnt on.
Glossy spots are the result of wear by the pan
base, especially if aluminium-based cookware or
unsuitable cleaning agents are used. These are
difficult to remove.
8.4
Cleaning the cooktop
extractor
The air inlet nozzle and stainless steel grease filter
absorb the greasy particles from cooking vapours.
X
Make sure that the cooktop and cooktop
extractor are switched off (see „6 Functions and
X
Wait until the fan indicator shows
0.
X
Clean the cooktop extractor in accordance with
the cleaning cycles.
X
Clean the surfaces of the extraction system using
a soft, damp cloth, detergent or a mild window
cleaning agent.
X
Soften dried on dirt using a damp cloth (do not
scrape it off!).
