EN
31
Functions and operation
www.bora.com
5
6
7
Fig. 6.36
Turning the knob ring anticlockwise
O
O
In the range from 0 to 20 minutes, the time reduces/
increases in both directions by one minute at a time, while the
increments are 5 minutes for the rest of the range.
O
O
After confirming with a touch command, an acoustic signal
is heard, the cooking zone timer is activated and the set time
starts to count down.
O
O
The control knob display changes to the current cooking
session and the timer symbol is displayed.
O
O
The set power level and the remaining time are shown
alternately in the control knob display for 3 seconds.
O
O
Once the remaining time is less than 2 minutes, only the
remaining time is displayed.
O
O
Once the remaining time is less than 5 seconds, the remaining
time flashes.
Changing active timers
O
X
Repeat the steps for cooking zones with an active timer (see
“Activating cooking zone timers”).
O
X
Change the set time and restart the timer.
Switching the timer off early
If the cooking session is to be continued:
O
X
open the cooktop function menu;
O
X
select the menu item “timer function (automatic cut-off)”;
O
X
decrease the set time to
000
and confirm the entry.
O
O
The timer is deactivated early and an acoustic signal is heard.
O
O
Active cooking sessions are resumed unchanged.
If the cooking session is to be ended:
O
X
turn the knob ring to power level
0
O
O
An acoustic signal sounds and the cooking zone is switched
off.
Time lapsed
O
O
The cooking zone switches off automatically.
O
O
An acoustic signal is heard.
O
O
0 0 0
and the timer symbol can be seen flashing in the
control knob display.
O
O
After 5 seconds the acoustic signal and the flashing display
are automatically deactivated.
i
The flashing display and acoustic signal can be stopped
early with a touch command on the control knob.
O
O
If necessary, the residual heat indicator
H
is then displayed.
O
O
The cooking zone is deactivated and the control knob display
shows
0
.
O
O
The residual heat indicator
H
appears in the control knob
display if necessary.
6.6.3 Timer function/automatic cut-off
(not on PKT3)
When a cooking zone is in operation, the automatic cut-off on
the timer function automatically switches it off once a preset
time has lapsed.
i
You can set a time range of between 1 and 120 minutes
for the timer functions.
i
When the bridging function is active, the timer is adopted
for both cooking zones.
Activating cooking zone timers
O
X
Open the cooktop function menu.
O
X
Do the following:
1
2
3
4
Fig. 6.34
Activating cooking zone timers
O
O
The timer is activated for the chosen cooking zone.
O
O
The control knob display shows the time to be set beginning
at
0 0 0
and the timer symbol .
O
O
If no time is set within 4 seconds, the timer is deactivated.
The control knob display goes back to the current cooking
session.
Setting the time and starting the timer
5
6
7
Fig. 6.35
Turning the knob ring clockwise
Содержание Professional PKA3
Страница 45: ...EN 45 Notes www bora com 11 Notes...
Страница 46: ...EN 46 Notes www bora com...
Страница 47: ...EN 47 Notes www bora com...
