bora PKI3, Инструкции по эксплуатации и монтажу

Страница: 29 / 32

EN
29
Decommissioning, disassembly and disposal
www.bora.com
9 Decommissioning, disassembly and disposal
9.3 Environmentally-friendly
disposal
Disposal of transport packaging
i
The packaging protects the device from damage in
transport. The packaging materials have been selected
from environmental and disposal perspectives and are
therefore recyclable.
Returning the packaging to the materials cycle saves resources
and reduces waste volumes. Your specialist supplier will take the
packaging back.
X
Give the packaging to your specialist supplier
or
X
Dispose of the packaging properly in line with local
regulations.
Disposal of old appliance
Electrical devices marked with this label
may not be disposed of in domestic waste
at the end of their service life. They must
be disposed of at a collection point for
the recycling of old electrical or electronic
devices. You can find information from your
city or district council.
Many electrical and electronic devices still contain valuable
materials. But they also contain damaging materials which
were necessary for them to function properly and safely. These
can damage human health or the environment if disposed of
improperly or incorrectly handled.
X
Never put your old appliance in domestic waste.
X
Take the old appliance to a regional collection point for return
and recycling electrical and electronic components and other
materials.
X
Observe all safety and warning information
(see „2 Safety“).
X
Follow the enclosed manufacturer’s information.
9.1 Decommissioning
Decommissioning is understood as final shutdown and
disassembly. Following decommissioning, the device can either
be installed into other units, sold on privately or disposed of.
i
Electricity and gas connections may only be disconnected
by qualified specialists.
X
To decommission, switch the device off
(see „6.2 Switching the system on and off“)
X
Disconnect the device from the power supply.
9.2 Disassembly
For removal, the device must be accessible for disassembly and
disconnected from the power supply.
X
Undo the appliance fixture.
X
Remove the silicone joints.
X
Remove the device from the worktop by lifting it upwards.
X
Remove any other accessories.
X
Dispose of the old device and any contaminated accessories
as described under “ Environmentally-friendly disposal”.