background image

EN

10

Safety

www.bora.com

2.5  Safety instructions – 

disassembly and disposal

The appliance must only be disassembled by 

trained specialists who are familiar with and 

comply with the standard national regulations 

and supplementary regulations of the local utility 

companies. 
Work on electrical components must only be 

conducted by trained electrical personnel.

 

 DANGER!

Risk of electric shock!

Incorrectly disconnecting the appliance 

from the mains results in a risk of 

electric shock.

X

X

Securely disconnect the appliance 

from the mains using LS switches, 

fuses, automatic circuit breakers or 

contactors.

X

X

Use an authorised measuring device 

to ensure that there is no power to 

the appliance.

X

X

Do not touch exposed contacts on 

the electronic unit as they can 

contain residual charge.

2.6  Safety instructions – spare parts

 WARNING!

Risk of injury and damage to 

property!

Incorrect components can lead to 

personal injury or damage to the 

appliance. Modifications, additions or 

alterations to the appliance can lead to 

safety risks.

X

X

Only use original spare parts for 

repairs.

INFO 

A damaged power supply cable must 

be replaced by a suitable power supply 

cable. This may only be done by an 

authorised member of the After Sales 

Service team.

2.7  Use as intended

The appliance cannot be used at altitudes above 

2,000 m (metres above sea level).
The appliance is solely intended for preparing 

food in private households. This appliance is not 

intended for:

Q

Q

Outdoor use

Q

Q

Installation in vehicles

Q

Q

Heating rooms

Q

Q

Use in non-stationary installation sites (e.g. on 

ships)

Q

Q

Use with an external timer or a separate 

remote control system (remote operation)

Any use other than that specified in these 

operating and installation instructions or any use 

that goes beyond that which is described here is 

classed as unintended. BORA does not assume 

any liability for damages caused by improper use 

or incorrect operation.

All misuse is prohibited!

INFO 

BORA Holding GmbH, BORA Vertriebs 

GmbH & Co KG, BORA APAC Pty Ltd 

and BORA Lüftungstechnik GmbH do 

not assume any liability for damage 

arising from non-adherence to the 

safety and warning information.

Содержание PKCH2





































Отзывы: