bora CI11, Инструкции по эксплуатации и монтажу

Страница: 15 / 28

EN
15
Installation
www.bora.com
5.3 Assembly instructions
1
3
2
Fig. 5.1 Recommended minimum clearances
5.3.1 Safety distances
X X
Maintain the following safety distances:
[1]
Minimum distance of 50 mm at the back from of the worktop
cut-out to the rear edge of the worktop.
[2]
Minimum distance of 50 mm from the left and right of the
worktop cut-out to the adjacent cabinet or wall. For ergono-
mic reasons and to ensure efficient cooktop extraction, a
minimum clearance of 300 mm is recommended.
[3]
Minimum distance of 700 mm between the worktop and the
wall unit. A minimum clearance of 1000 mm is recommen-
ded for ergonomic reasons.
5 Installation
X X
Observe all safety and warning information (see Safety
chapter).
X X
Follow the enclosed manufacturer's information.
INFO The device may not be installed above cooling
devices, dishwashing machines, stoves, baking
ovens as well as washing and drying machines
INFO The contact surface of the worktops and the
wall sealing strip must be made of a heat-
resistant material (up to approx. 90 °C).
INFO Countertop cut-outs must be moisture-sealed
using suitable means, where necessary fitted
with a thermal insulator.
INFO If the glass ceramic induction wok is used, the
rebate dimensions must be increased to 7 mm
for flush installation!
5.1 Checking the deliverables
Name Quantity
Operating and installation instructions 1
Cooktop mounting screws 4
Sealing tape 1
Cooktop 1
Glass ceramic scraper 1
Height compensation plate set 1
Cooktop mounting straps 4
Glass ceramic cleaning instructions 1
Tab. 5.1: Scope of delivery
X X
Check the scope of delivery for damage and make
sure it is complete (see ).
X X
If there are any missing or damaged parts, please
notify BORA Customer Services.
X X
Do not under any circumstances install parts which
are damaged.
X X
Dispose of transport packaging in the proper manner
(see Decommissioning and Disposal chapter).
5.2 Tool and aids
The following tools are required for the correct installation
of the cooktop:
Q Q
Phillips screwdriver Z2 Silicone for sealing cutting sur-
faces