BQ610-B Online Controller Operation manual
9
Maintenance
Maintenance Schedule
The cleanliness of the measuring window is very important to maintain accurate readings.
It is recommended to clean the sensor light Windows and dry them with a clean cloth before
testing.
Maintenance task
Frequency
Sensor cleaning
Every 30 days
Calibration
Every 3-4 weeks
Replace brush
Every 3 months
Maintenance
1)
Clean the sensor surface
：
Wash the outer surface of sensor with tap water, if there is
still residue, using soft brush, for some stubborn dirt, household detergent can be
added in tap water to clean.
2) Window surface:
clean the outer surface of the sensor with tap water. For some
stubborn dirt, traditional detergent and soft cloth can be used to clean it. It is
forbidden to scrape the window surface with hard objects.
3)
Check the cable
：
inspect the sensor cable if there is damage.
4)
Check whether the sensor shell is damaged due to corrosion or other reasons.
5) Check whether the sensor's cleaning brush is damaged, excessive wear leads to less than
the light window and other abnormalities.
Attention
The sensor contains sensitive optical and electronic components.
Make sure the sensor is not subjected to severe mechanical impact.
There are no components inside the sensor that require user maintenance.
