Booth EXL95H, Руководство по эксплуатации продукта

Страница: 2 / 24

2
Contents
Section Page Section Page
Introduction & Specification 2-3 Fault Finding 16-17
Model Numbering, Installation &
Commissioning 4-6 Replacement Parts 18-21
Wiring Schematics & Water
Circuits 7 -15 Removal, transportation
and Disposal 22
Introduction
The EXL95H & EXL96H units are med/high capacity chillers incorporating soda recirculation which
include an option of a cold carbonator incorporating soda recirculation. It is designed in a modular fashion
to cover a range of control options, with a single mechanical thermostat, or a choice of two digital
thermostats which are specified at time of order. They also have the capacity to incorporate up to 6 syrup
cooling coils.
The wiring schematics included in the following pages reflect this modularity:
Safety
The EXL95H/96H models use a R290 (Care 40, Propane) refrigerant. Below are some safety points
which the end user must adopt to mitigate the risk of unsafe conditions arising.

Service must only be carried out by a suitably qualified refrigeration engineer.

The unit must be isolated from the electricity supply before removal of the covers.

Do not damage the refrigeration circuit.

Ventilation openings must be clear of obstructions.

There must be a gap of at least 100mm between the appliance and a wall or other restriction.

Where electrical components are replaced, the new component must be of the same type.

Operate the unit within (ambient) operating temperatures; 10
⁰C to 32⁰C.
Introduction and Specification