3
©Copyright LOTRONIC 2016
BOOST-LIGHT70
Specifications
Voltage ................................................................................... 220-240V AC~ 50/60Hz
Consumption ....................................................................................................... 48W
LED lamp: ................................................................................... 12 x 1W (RGBW) x 4
DMX channels ........................................................................................................... 8
Control modes ..................................................... Auto, Master/Slave, DMX, Remote
Power cable ........................................................................................................... 4m
Packing Size...................................................................................... 38 x 15.5 x 92cm
Power supply, wire Connection
Use a dedicated plug to connect the LED light and power. Make sure the unit is connected to the appropriate
power supply.
Installation of the units
Before positioning the light, ensure the stability of the installation site. Drive the screw into the screw hole on
the stand. Make sure that the units can’t fall from the stand. The manufacturer cannot be held responsible for
damages due to bad installation of the units.
Warning
Carry the lights only by the handle.
Features
The control panel features 4 buttons and a 4-digit LED display.
Operation
1)
When power is on, the digital LED display works with red dots. When a DMX signal is present, the dot will be
shiny.
2)
DMX address code setting: Press “MENU” button. When the digital LED displays d001-d512, press “UP” or
“Down” to set the address code. The code ranges from 001-512.
3)
IP code setting: Press “MENU”. When IP.01-IP.64 is displayed, press “UP” or “DOWN” to set the address code.
The code ranges from 001-512.
4)
Internal program running: There are 5 built-in programs. Press “MENU” to choose one of the built-in
programs from A1-A5: A1 is static color mode, A2 LED jump function, A3 LED rainbow function, A4 LED sound
active function, and A5 LED strobe function, A6 is Auto Run and A7 scrolling effect.
Button Specifications:
A1
Solid Mode
←UP/DOWN
→ 1-19
A2.
Jump Mode
←UP/DOWN→
1-19
A3.
Rainbow mode
←UP/DOWN→
1-19
A4.
Sound active mode
←UP/DOWN→
1-19
A5.
Strobe Mode
←UP/DOWN→
1-19
R.
Solid Red Color intensity
←UP/DOWN→
0-255
G.
Solid Green Color intensity
←UP/DOWN→
0-255
B.
Solid Blue Color intensity
←UP/DOWN→
0-255
U.
Red+White Color Wash
←UP/DOWN→
0-255
D.
DMX Mode
d.512
IP.
IP Mode
IP.64
