12
The unit should be mounted via its screw holes on the bracket. Always ensure that the
unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is able to support a weight of
10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the
weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is
out of the touch of people and has no one pass by or under it.
Operating Premises: Whenever possible, the operation of a LASER should be done in a
room or in an enclosed or delimited place for this purpose.
The access of room and openings to the outside must not be located in the axis of a
direct beam.
The floor must be free of obstacles. The causes of accidental reflection and scattering of
laser beams must be removed (misplaced windows, furniture or objects with polished
faces).
The paintings (walls, partitions, ceilings ...) and flooring should preferably be matt. The
diffuse reflections of class 4 lasers, focused beams of lasers of class 3 to visible or near
infrared light should be considered dangerous and treated as such.
When using powerful lasers (Classes 3 to focused beam or 4), eliminate the beam
potential impact on flammable materials (wood, paper, fabric or plastic) that can be in
from fire in power densities of the order of several W.cm-2 applied for a few seconds.
The access to the laser emission zones should be reported using the signs in accordance
with the Ministerial Decree of 4 November 1993 "Signs of safety and health in the
workplace" and the NF X 08-003 "Symbols graphics and symbols - colors and safety signs
"of December 1994. This signaling is completed by the words of the class of laser product
and the instructions provided in the NF EN 60825-1 standard. Such access can be
controlled, at least when lasers are operating.
Emissions control : the control panel should be placed outside the locations exposed to
hazardous emissions. The control of lasers in Classes 3 and 4 should be under the control
of a key control, removed when the device is not in use and owned by a qualified person.
Disclaimer : The use of this device is exclusively for professional activities show and
display.
It is forbidden to allow projecting the beams to the audience and any areas accessible by
persons without appropriate eye and skin protective items. It is forbidden to use this
device for any other purpose than that for which it is intended.
It is forbidden to shine any laser beam to the aircrafts.
If the laser is operated in a situation where health or property injury may occur,
operation MUST be stopped immediately!
Manufacturer and distributors are not responsible for any damages caused by use of
BoomtoneDJ lasers. User is responsible for applying conditions of use according to regulations
stipulated in EN60825-1:2014 and all locally applicable safety laws and regulations.
Содержание LightCube-LZR
Страница 1: ...1 MODE D EMPLOI USER MANUAL ...
