19 |
P a g e
B o o k e r L A B ® © 2 0 1 7 - 2 0 1 9
Vintage Motor Controller (VMC) for Leslie Speakers (v19-0214)
[email protected] - +1 (864) 843-4459
Clonewheel or Non-Hammond Keyboards (VMC)
This control mode is for Nords, Viscounts, etc. that output audio on a ¼” TRS or XLR connector
and don’t generate speed signals. Here, speed is controlled by a half-moon switch, or
footswitch, plugged into the
Speed Control Switch
¼” jack on the VMC. The player can then
select Fast, Slow or Stop.
The VMC adds Stop and Memphis Modes, which can be controlled by a footswitch connected to
the
Stop Switch / Memphis Mode
¼” jack, as shown below.
