BKS-UVRobot_Product Manual
BooCax
18
/
23
boocax.com
⚠
Attention:
When mapping, the turning should be deployed with path points which cannot pass through the
wall, as shown in the figure below:
As shown in the figure above, when the robot has to move from A to C, but is obstructed by a wall
or an unmovable obstacle inbetween, the correct path deployment should be A-B-C.
B
must be
set as it is the key node of the turning. The figure on the right shows the wrong deployment, in
which the path will go through the wall directly, causing the robot unable to walk.
