Bontrager TRIP 2, Руководство пользователя

Страница: 20 / 22

If the computer is giving erratic information, the battery may be running low.
Replace the battery whenever the computer malfunctions, or every 6 months.
When purchasing a new battery, it is best to take the old battery to the store with
you. This is the battery type: CR2032, lithium cell, 3 volts.
When the battery is removed, the computer automatically resets function totals
to zero. After installing a new battery, you can manually set your totals, but you
must note those values before removing the battery.
To Replace the Battery
Battery Maintenance Reset
A Reset erases all data and settings. Before a Reset, you may wish to record the
total miles (or kilometers) of the odometer so you can set the odometer to this
number later during set up.
Figure 12. Reset Button Figure 10. Removing the Battery Cover
Hold the Reset button (AC) for two seconds (Figure 12). A ball point pen
works well for this. The button is on the back of the computer.
To Perform a Reset
Remove the computer from its base. Rotate the battery cover about one-
quarter turn in a counter-clockwise direction (Figure 10). A coin or flat head
screwdriver works well for this.
Lift the battery cover, exposing the battery. Be careful to avoid losing the
rubber O-ring seal.
Remove the old battery.
Insert the new battery with the ‘cross’ and identifying label pointing up
(Figure 11).
Replace the battery cover with O-ring seal and rotate clockwise one-
quarter turn.
1.
2.
3.
4.
5.
Figure 11. Insert the New Battery