Bontrager 281540, Руководство пользователя

Страница: 8 / 11

5
Fork MaintenanCe
In addition to the checklist on page 2, your fork may require
additional maintenance. This section provides information about such
maintenance.
re-alignment of the fork is not possible
Bontrager carbon fiber or aluminum forks, and their aluminum
dropouts, are not as ductile as steel. Never attempt to make adjust-
ments to a part by bending or twisting it. If the fork has been
damaged, take it to your Bontrager dealer for inspection.
keep the fork clean
Keep your fork clean with a soft rag and a solution of mild detergent
and water.
avoid chemicals or heat
Do not use solvents or harsh chemicals on the fork, as they can
damage the paint and also the adhesive which joins the fork parts.
Excessive heat over 180º F. (82º C.) can also damage the adhesive.
Completely inspect the fork every six months
Every six months, take the fork out of the bike and inspect the steerer
and crown. Since this requires disassembling the headset bearings,
this procedure requires special tools and skills. If you do not have the
training, take your bike to your dealer for inspection.
to inspect the fork
1. Remove the fork from the bike
2. Thoroughly clean the steerer and fork crown area.
3. Look for signs of fatigue or impact damage as explained on pages
2-3 of this manual.
If the fork shows any signs of stress, replace it. Do not ride a fork with
signs of stress.
do not modify the fork in any way
Modifying the fork in any way will void the manufacturer's warranty
and may be unsafe.
Removing paint from a Bontrager carbon fork requires special
techniques, so should only be done at the Bontrager factory. See your
Bontrager dealer for more information.
warninG
never modify your fork in any way, including sanding,
drilling, filing, removing redundant retention devices, or
by any other technique. such modifications will void your
warranty, may cause your fork to fail, and may contribute to
loss of control resulting in personal injury or death.