Bontrager 263759, Руководство пользователя

Страница: 14 / 24

9
If any component is made of carbon fiber composite,
make sure the connecting parts are carbon-compatible
(
see page 11 ).
To install bar-ends
1. Make room on the handlebar for the bar-ends.
Remove the grips, slide the controls, and reinstall the
grips. If necessary, install new grips with open ends.
2. Remove any oil, grease, or dirt from the handlebar.
For carbon bars, clean with rubbing alcohol and a shop
rag; clean until the rag shows no discoloration.
3. Slide the bar-ends onto the handlebar and set the
angle position.
4. Install handlebar plugs.
5. Follow the inspection procedures and tighten the
handlebar clamp bolts.