not be inserted further than the rear sealing ring and must lie between the front and
rear sealing ring. If the bag lies over one or both of the sealing rings, the bag cannot be
properly sealed.
5
The bag opening must lie
fl
at on the welding wire. Otherwise, welding will not work
properly. Close the cover of the device. The seal presses the bag onto the sealing wire to
create a smooth seam. Make sure that both corners of the lid are closed. If necessary,
press the top cover again so that the lid clicks in audibly and
fi
rmly. Select the mode
(dry or wet). When the selection is
, the
indicator lights up. When
is selected,
Dry
Dry
Wet
the indicator
will light up.
Wet
1. Buttons:
1) SEAL 2) DRY 3) WET 4) EX-VAC 5) CANCEL
2. Indicate Light:
6) SEAL Indicator 7) DRY Indicator 8) WET Indicator
9) EX-VAC Indicator 10) CANCEL Indicator
3. Other Parts:
11) Open Button 12) Vac Cotton 13) Vac Chamber
14) Heating Seal 15) Sealing Rubber Strip
16) External Interface / Suction Interface
Make sure that the weld is properly closed. A correct weld should be a smooth, straight
strip without wrinkles.
Wait 15 seconds before sealing the next bag to allow the appliance to cool down.
Fill the bag in such a way that no food residues or liquids can escape and enter the
machine during sealing.
Parts
1
6
7
8
9
10
2 3 4 5
11
14
15
16
12
13
