9
Cleaning
►
Remove the plug from the mains power socket before beginning to clean the device.
►
Ensure there isn’t moisture can penetrate the device during leaning.
►
Do not use aggressive or abrasive cleaning agents, as these may corrode the surface
of the casing.
►
Do not use any hard or sharp objects to remove any adhesive from the welding wire.
Otherwise the welding wire or the insulation could be damaged.
►
Clean the surface of the appliance with a lightly moistened cloth and a mild
detergent.
►
Wipe off the upper and the lower sealing rings, as well as the press seal with a damp
cloth. Ensure that the appliance is dry before using it again.
►
Washable parts
Press the button on both side to open the appliance to the top and bottom panel at 90
degrees, then can take out the drip tank. All the drip tank panel (below tick
part)
can use a dishwasher and other equipment to wash it. But attention below tick
part can not wash it. Also to note the appliance must be turned off the power before you
wash it.
Storage
►
The appliance has a built-in cable retainer on the underside of the housing, on which
you can wrap the power cable when it is not in use. This prevents the power cable
from getting caught or soiled, or becoming a source of danger by hanging loosely
down.
►
Store the appliance in a clean, dry place away from direct sunlight.
