BonsenKitchen CM8003, Руководство по эксплуатации

Страница: 8 / 12

5
DELAY BREW
If you do not want the coffee maker to start operation immediately, for example now it is
8:10 am, you hope that the coffee maker will automatically start at 1:10 pm, first follow
steps 1 to 5 of above section, then you can set the automatic start function as follows:
1. Press AUTO/PROG button once, LCD will show the automatic starting time and green
indicator will flash.
2. Press the HOUR and MINUTE button to set the automatic starting time, that is 1:10pm;
The time cycle is 12 hours.
Note:
3. Press AUTO/PROG button once again and green indicator will go out.
4. Press and hold AUTO/PROG button for 3 seconds, green indicator will keep constant on.
5. When the time is due, green indicator will go out and red indicator will come on, then
the unit starts brewing. At the completion of brewing, 3 buzzer sounds will be heard.
10. Always turn the coffee maker off and disconnect the power supply when not use.
Pay attention to pour the coffee out, otherwise you may be hurt as
Note:
the temperature of coffee just finished is high.
CLEANING AND MAINTENANCE
Be sure to unplug this appliance before cleaning. To protect
CAUTION:
against electrical shock, do not immerse cord, plug or unit in water or liquid.
After each use, always make sure plug is first removed from wall outlet.
1. Clean all detachable parts after each use in hot sudsy water.
2. Wipe the exterior surface of unit with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the above area of the funnel and drip onto the product
base during brewing. To control the dripping, wipe off the area with a clean, dry cloth
after each use.
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean
it.
5. Replace all parts and keep for next use.