6
DESCRIPTION OF PARTS & CONTROLS
FIGURE B
BONSAI
®
VELOCITY Conserver
Cylinder
Adjustment
Knob
Cylinder
Alignment
Pins
Selector
Switch
Oxygen
Pressure
Gauge
With
Rubber
Guard
•
Cylinder Adjustment Knob:
This is used to attach the
unit to any CGA 870 post-valve cylinder�
•
Oxygen Pressure Gauge :
Enables the user to monitor the
contents of the compressed oxygen cylinder and is
protected by a rubber guard� The BONSAI
®
VELOCITY
conserver is equipped with a gauge that reads up to
4,000 PSI�
•
Selector Switch:
Enables the user to select the desired
setting, as well as “OFF” and “cf 2” or “cf 4” (continuous
flow)� When not in use, the switch should be turned to the
“OFF” position�
•
Cylinder Alignment Pins:
When assembling the
unit, these parallel pins must be inserted into
the holes on the CGA 870 post valve�
•
Seal Washer (Gasket, FR-870G):
Creates the
interface between the post valve and the BONSAI
®
VELOCITY conserver� Besides offering a rugged interface,
it also surrounds the oxygen path in a ring of stainless
steel or brass�
WARNING! Use only a manufacturer-specified seal
washer (gasket).
CGA 870 Seal Washer
(Gasket FR-870G)
