bonomi A4M001, Инструкция по безопасности и эксплуатации

Страница: 15 / 20

Hydraulics
Mito
QTH 6-10 GPM
15
Your MITO Hydraulics chainsaw is a power tool designed to perform straight cuts into
concrete, reinforced concrete, stone, using the proper diamond chain and bar. The
product needs sufficient clean water to operate and cool bar and chain through the water
inlet system. Powerful and lightweight, this product is designed to perform finishing jobs
by professional cutters and any kind of contractors. Follow general contractor, local and
national regulations how to dispose of slurry generated during operating the saw.
Operator needs to be properly trained.
Do not use this product to cut wood, plastic or other materials not listed above.
Do not use bars and chains different from the ones defined in this user manual.
In the following text, figures are identified by numbers,
details inside figures by letters. Figures are depicted on the
first pages of this user manual.
A safety message alerts you to potential hazards which
could injure you or others or cause property damage. The
safety messages or signal words for product safety signs
are DANGER, WARNING and CAUTION . Each safety
message is proceeded by a safety alert symbol and is
defined as follow:
- DANGER : indicates an imminently hazardous
situation which, if not avoided, will cause death or
serious injury. This safety message is limited to the
most extreme situations
- WARNING : Indicate a potentially hazardous
situation which, is not avoided, could result in
death or serious injury.
- CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury. It may also be used to alert
against unsafe practices that may result in
property-damage-only accident
In this manual all of them, DANGER, WARNING and
CAUTION are marked with the symbol
1)
G
G
e
e
n
n
e
e
r
r
a
a
l
l
s
s
a
a
f
f
e
e
t
t
y
y
r
r
u
u
l
l
e
e
s
s
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) Work area: CAUTION
a) Keep working area clean and well lit. Cluttered
and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Personal safety. CAUTION
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
b) Use safety gear: always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, gloves, hard hat, or hearing protection used
for appropriate conditions will reduce personal
injuries.
c) Avoid accidental starting. Ensure the switch is in
the off position before plugging in. Carrying power
tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times . This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
and long hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust related hazards.
d) Use auxiliary handles supplied with the tool. Loss
of control can cause personal injury.
3) Power tool use and care. WARNING
a) Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.