Assembly Steps
STEP 1
CODE
M6X45
M6X65
D
C
8
8
E
8
G
16
I
4
J
4
HARDWARE
QTY
I
I
J
J
Assembly method: Firstly, assemble column (1 & 2) and side fence (3 & 4) according
to circular marks on the figure. M6x65 screw (D) is screwed from the screw hole of
outer column with Curve washer (G). Fence (3 & 4) are fixed on column (1 & 2). Then
assemble connecting bar (5) according to square marks on the figure. M6x18 jam
nut (E) is inserted from screw hole on the connecting bar. M6x45 screw (C) is screwed
in and fixed from the screw hole of column with Curve washer (G) in the middle. Then
insert protective plastic parts on the two ends of supporting column, insert leg stopper (I)
on the bottom and top stopper (J) on the top.
Note: Assemble fence (4) and ladder on the same side. You can decide that the ladder
should be assembled on the left or right of the bed frame according to your needs. And
the fence (4) can be adjusted synchronously according to your needs.
Assemble column and side fence
