BonnetPro MiniMax MULE 220R, Руководство пользователя

Страница: 6 / 18

SoMe tHinGS to reMeMBer Before You Start
Thank you for your purchase of the MiniMax. With reasonable care this machine should give you years of productive service. We
appreciate the trust you placed in us with your purchase.
#1 To start, only fill your solution tank with 1 gallon until you become accustomed to the feel and weight of your machine. Also
start with a broken in soft carpet bonnet (19”) if possible, a 17” will also work but it is harder to center under the pad drive.
Do not start with a new fiber pad, especially if you are unfamiliar with a rotary machine. This will grab the carpet more ag-
gressively and make it harder for you to become comfortable with your new MiniMax. Watch the 'Rotaries Made Easy' video,
found on the MiniMax page and in the CT6 Forum & Education Center.
#2 Your solution tank is not completely sealed as to allow air into the tank for the suction from the pump. DO NOT over fill the
tank as spilling will occur. The blue hose that feeds the pump should be facing the back of the machine to allow the maximum
solution removal from the solution tank.
#3 Adjusting the handle to the correct height will make you’re cleaning experience a much better one. For most people the
handle grips should be parallel to your hip bone. If it is too high the machine will be harder to operate and control. If it is to
low you will be leaning over to far and will be uncomfortable. Once you have found your perfect height than lower the stain-
less steel clamp down to the main handle clamp and tighten. This will allow you to always adjust the handle quickly to your
favorite position.
#4 Remember if you live in an area of the country that drops to freezing temperatures to protect your pump and fittings. See
inside owner’s manual for more detail.
#5 Be careful when rapping the cord on the side of the handle that contains the on/off switch that activates the solution pump.
Please note how the cord was rapped when your received your machine and duplicate this method of securing your cord. Or
your machine may use a pigtail and extension cord that does not require you to wrap the cord.
Thank you again for your purchase. Please feel free to call 877-477-1615 if you have questions. You can also watch the MiniMax
video at
www.bonnetpro.com and if you want more low moisture cleaning info please watch the “How to Encap” video at our site
also located in the CT6 video section.