Page 9
BONNET CIDELCEM GRANDE CUISINE
Siége social:
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
Fix the front to the underframe with HM 5 x 16mm nuts
and bolts + 2 washers either inside when the appliance
design makes this possible (cupboard) or from
underneath.
Connect the units to each other:
1) at the rear inside the vent again with 5 x 16mm
fixings irrespective of the type of equipment.
2) at front inside the facia after removing the front of the
appliance (see section).
- Use HM5 x 16mm bolts + 5mm Ø washers for
boiling pan or deep fat fryer connected to
cooking unit (a captive nut is located in the side
rails behind the facia).
- Use HM5 x 16mm nuts and bolts + 5mm Ø
washer to connect cooking units together,
having removed the M5 captive nut from one of
the 2 appliances (from the screw side), using a
screwdriver.
2.6 ASSEMBLY ON AN INDIVIDUAL UNDERFRAME
Fasten appliances together.
11) at the back through the flue using HM 5 x 16 bolts for all types of appliance.
2) at the front behind the facia (see section before)
- Use HM5 x 16mm nuts and bolts + 5mm Ø washers to connect cooking units together,
having removed the M5 captive nut from one of the 2 appliances (from the screw side),
using a screwdriver.