3B-390977NU – 10/18
Page 8
EN
BONNET GRANDE CUISINE
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
14.3 AUTOMATIC CLEANING WITH A PROGRAMMED START
This function offers the possibility to program a daily automatic start time and the desired wash intensity.
NOTE: It is always possible to start an automatic cleaning cycle manually (see the paragraph ‘Automatic cleaning started manually’), a rinse (see
paragraph ‘Rapid rinse’) and/or priming (see paragraph on ‘Replacing the detergent container’)
This function is accessible via the client parameters in the “CHEF” menu (normal PIN code)
- Scroll through the various parameters to the parameter "setting the cleaning time"
- Set the cleaning time.
Select “the time” for starting the cleaning cycle
1st press = adjusts the hour;
2nd press = adjusts the minutes.
- Once adjusted to something other than --:--, the wash will start automatically at the set time (provided the oven is not in use). To
cancel the automatic start reset the parameter to --:-- (set the hours to 00, then decrease the minutes to --:--).
- Then adjust the cleaning intensity by selecting the next parameter.
Select “cleaning intensity” of 1 to 3
- Validate and exit the menu.
14.4
FORCED CLEANING FUNCTION
The forced cleaning function makes the operators clean the oven regularly. If a cleaning cycle is not undertaken after a predetermined number
of days the oven will cease to operate normally, only the cleaning cycle function will be accessible.
This function is inactive by default. The operator can’t access this parameter (a service technician is needed)
If activated:
- 24 hours before a programmed cleaning cycle is require the display will flash after every cooking cycle and when the oven is switched on.
This screen alternates with one showing the number of days, inviting the operator to
clean the oven and advising the number of days left before it locks down.
Pressing the screen clears the message which will reappear the next time the oven
is switched on if it is not cleaned.
NOTE: It is always possible to start an automatic cleaning cycle manually (see the
paragraph ‘Automatic cleaning started manually’), a rinse (see paragraph
‘Rapid rinse’) and/or priming (see paragraph on ‘Replacing the detergent
container’)
- If the maximum time limit is reached without cleaning a blocked screen appears (Red) when switched on or after a cooking cycle this forces
the user to clean the oven immediately.
ATTENTION: the oven locks down (cooking is not possible) if it has not been cleaned.
This screen indicates that the operator must clean the oven immediately.
The appearance of this message starts a cleaning cycle (see the paragraph
‘Automatic cleaning started manually’).
Only a completed wash cycle will clear the message and unlock the oven.
