45°
45°
H
D
11
STEP-BY-STEP PLAN
6,5 M X 10 M
STEP 3: ATTACHING TENSION STRAPS
Attach the supplied tension straps to the corner and side clamps as follows.
»
Make a loop at the end of the tension strap.
»
Pull the loop through the hole in the clamp.
»
Pull both ends of the tension strap through the loop.
There is one tension strap on each side clamp. There are two tension straps on each corner clamp.
STEP 4: PEGS
The tension straps are fixed using pegs in the ground. The pegs supplied are suitable for soft
ground. Make sure that if the ground is hard you use the right pegs or other anchoring methods
(eyebolts), hooks, concrete blocks etc... - not included.
Consider the following aspects when placing the pegs:
»
Use the 50 cm pegs where one tension strap per anchoring point is attached, use the 80 cm ones
in the places where three tension straps come together. Only 80 cm tension straps are supplied
with tents of 100 m
2
and larger.
»
Place the peg at a distance which is roughly the same as the height of the pole on that location.
»
Place the peg in the ground at an angle of 45°. Place the peg in the direction of the tent with the
peg head facing away from the tent
Содержание PROFLEXX SINGLECOATED 10 M X 10 M
Страница 1: ...MANUAL 6 5 M X 10 M ...
Страница 2: ......
Страница 76: ...sales bongastretchtent com Europalaan 83 9800 Deinze ...