ver.2016 r3
the gas input pipe. Use pipe joint compound that is resistant to all gasses on the male pipe
fitting and tighten securely. When connecting to a LP cylinder use the regulator supplied with the
hose to connect to a LP cylinder and tighten securely.
Turn all burner control knobs to the
OFF
position. Turn the gas supply on. Then
carefully check all gas connections for leaks
with a brush and half-soap/half-water solution
before lighting. See CHECKING FOR GAS
LEAKS in the Installation Instructions And
Owner’s Manual.
NEVER USE A MATCH OR
OPEN FLAME TO TEST FOR LEAKS.
The control panel must be flush with the enclosure face as shown below. Proper grill airflow
must be maintained. Do not block. It is not necessary to remove the control panel or knobs for
installation.
Toll Free: (855) 678-0088
bonfireoutdoor.com
4
BONFIRE 3 And BONFIRE 4
BONFIRE Prime 500
