Bonex BONEX-SCOOTER Series, Инструкция по эксплуатации

Страница: 3 / 39

BONEX-SCOOTER
Instruction for use
Version: 2016_08 Page 1
1. Safety Instructions
The Bonex-Scooter is a top quality product made in Germany. However,
the product is only as good as can be guaranteed with proper, careful
handling and care of all parts.
We therefore ask you to read the following instructions for use and care of
the scooter carefully.
Please read and understand the instructions for use carefully, before
using your Bonex-Scooter for the first time! (PRTFM ☺)
1.1 User Instructions
Check that the scooter has been assembled properly before
use.
All screw connections and seals must be checked
carefully!
The scooter is pre-charged and ready to use.
However the battery only reaches its maximum capacity
after being charged three or four times!
The scooter must be opened to charge the battery and for
inspection purposes.
It is necessary to remove the Tube complete!
The scooter is fitted with an „ON“ / „OFF“ switch.
However, the connecting cable must be connected to the
battery before first use.
DISCOVERY (RS) with 2 batteries and connecting cables!
The speed of the scooter can be regulated during normal
operation mode by a rotary switch.
Depending on model, the scooter is equipped with an
emergency drive switch.
The emergency drive switch is intended for operating in diving
situations in which normal operation is no longer possible.
In such cases, the driving speed cannot be controlled!
1.2 To Be Noted