CONFIGURATION
To enter
CONFIG MODE
, power on the pedal while holding the
TAP
footswitch. Release the
TAP
footswitch when both
LEDS
begin to pulse.
AUX JACK
Tap the
TAP
footswitch to toggle the
AUX
jack setting. The white
LED
will flash
to indicate the
AUX
jack setting.
1 flash = DISABLED.
2 flashes = EXTERNAL TAP TEMPO (Page 7)
3 flashes = EXPRESSION (Page 7)
4 flashes = MIDI via TRS. (Page 7-8)
TRAILS
Tap the
BYPASS
footswitch to toggle the
TRAILS
. The pink
LED
will flash to
indicate the
TRAILS
setting.
1 flash = TRAILS OFF
2 flashes = TRAILS ON
EXPRESSION CONFIG
ASSIGN EXPRESSION PEDAL
Turn any knob to assign the
EXPRESSION
pedal to its function. The
LEDS
will
alternate flashing twice to indicate that it has been assigned. The
LEDS
will not
flash if the
EXPRESSION
is already assigned to that control.
1
2
NORMAL
KILL DRY
CALIBRATE EXPRESSION
1. Plug in the EXPRESSION pedal
2. Enter CONFIG MODE
3. Set the AUX jack to EXPRESSION
4. Set the EXPRESSION pedal to the TOE DOWN position, wait for the
PINK LED to stop blinking.
5. Set the EXPRESSION pedal to the HEEL DOWN position, wait for
the WHITE LED to stop blinking.
6. EXPRESSION is now calibrated
SET MIDI CHANNEL
1. Plug in the MIDI controller (Page 7).
2. Enter CONFIG MODE
3. Send a MIDI PC on whichever channel you would like use.
4. The PINK LED will flash twice
5. The MIDI channel is now set to that channel.
EXIT CONFIG
Hold both footswitches for 1/2 second to exit
CONFIG MODE.
KILL DRY
There is an internal DIP switch, which can be used
to cut the dry signal when running a parallel rig. To
cut the dry signal, switch DIP switch 1 to the lower
position. Will cut the dry signal even when pedal is
bypassed.
ART VAN
DELAY × USER MANUAL
PAGE 6 OF 9
