2. Now tap the Up / Down button to Raise / Lower the shade.
3. Tap the STOP button to hold the shade at a specific position.
4. For most shades, tapping the STOP button when the shade is already stopped will
cause the shade to move to the Favorite Position.
If you tap Up / Down / STOP without first selecting a channel, the previously selected channel
will be used.
Multi-Channel Control
To operate several shades at once:
1. Select more than one channel by pressing each channel button.
2. Now tap Up / Down / STOP buttons as needed.
If you later tap Up / Down / STOP without selecting a channel or group of channels, the
previously selected channel(s) will be used.
NOTE: For some shade protocols (Rollease, Turnils, Wynstan, Allen & Roth), all shades will
move at exactly the same time because these protocols support broadcast commands. For
other protocols (Somfy, Bofu), the shades will start moving at slightly different times because
separate signals need to be sent to each shade.
Moving Shade to Favorite Position
Somfy RTS
1. Select one or more channels of Somfy shades.
2. Tap the Stop button once.
3. If a favorite position is set, the shade(s) will move to their position.
Rollease, Turnils, Wynstan, Coulisse, Riel Americano
1. Select one or more channels.
2. Hold down the Stop button for approximately 2 seconds.
3. All selected shade channels will move to their favorite position.
Allen & Roth
Unfortunately my favorite position is not supported by these shade motors.
Olibra Confidential
