7
ASSEMBLY INSTRUCTIONS
4.
Insert and pull out the
power cord
plug of the
pump through the hole on the side wall of the
fountain base (B).
5.
P
lace the pump
(E)
into the fountain base
(B)
and attach the top fountain
(A)
to the fountain
base using 4 M8xL3
0
screws (BB) and 4 washers
(CC)
, tighten with spanner (EE). Then buckle the
6.
P
our
clean
water into
fountain base
through
the operation hole on the
bottom plate of top
fountain (A)
, make sure the water pump is fully
submerged to prevent pump damage.
V
iew the
water level through the operation hole, make
sure the the water level is between the
Max fill
line and Min fill line on the wall inside the fountain
base (B).
NOTE: Make sure the operation hole on the top
4 plastic caps (DD).
fountain align with the drain hole at the bottom
of the fountain base.
B
BB
CC
DD
