To Extinguish
Tending The Fire
required, place wood on top of coals. Be careful not to shift ashes.
To Light
OPERATION
MAINTENANCE
•
This outdoor fire pit should be inspected on a regultor basis to ensure product safety and long
product life.
•
Check handles to make sure they are secure.
•
Check components for any signs of damage or rust.
•
Wipe exterior surfaces with a mild cleaning product and water.
•
For stubborn surfaces use a citrus based degreaser and soft cloth.
•
Rinse surfaces clean of any cleaning product with water after cleaning is complete.
•
Remove built-up creosote from components with a chimney cleaning product.
•
Store fire pit in a cool dry place.
•
Use manufacturer-approved or supplied replacement parts and accessories only. Otherwise it
may void the warranty of this product and result in a hazardous condition.
•
Keep the fire pit free and clear from combustible materials and debris.
1. Make sure all debris is removed from the fire pit.
2. Place a layer of dry kindling or a natural firestarter onto the center of the log rack.
3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the
width of the firebowl.
4. Use a long match to light kindling.
3. Wait until glowing coals have developed before adding any additional wood. If additional wood is
1. Using the fire poker, carefully open the lid.
4.Using the fire poker, carefully close the mesh cover.
Bond Manufacturing Co., Inc. | Page 6
