BONAIRE Durango 4500E, Руководство пользователя, Страница: 9 / 21

Page | 9
Installation
BONAIRE WINDOW COOLER
Unit Installation
DO NOT
connect the power to the cooler until the installation is complete.
Internal Fixing of the Unit

IT IS MANDATORY THAT THE METAL FIXING BRACKETS SUPPLIED ARE FITTED TO
ENSURE A SECURE INSTALLATION.
Utilise the 2 fixing brackets and 8 screws provided (4 x
Screw
– 16mm Hi-Lo hex head and 4 x Screw – No. 8 x 1¼ pozi-drive) as shown in the diagram
to ensure the unit is adequately locked into position.

Ensure that the bracket is aligned within the indicated mounting track area on the underside of
the fan housing
– see diagram below. Drill 2x1/8” (3.2mm) holes and insert screws into unit as
per diagram and repeat for window frame with appropriate screws.

Ensure that the cooler is now fixed rigidly to the house structure












Close window against unit. Measure the gap of the
opening & cut the in-fill panel to fit in the gap left.

Fit in fill panel with screws (length of screws must not
exceed 25mm
(1”) in length) and seal any gaps with
silicone.

Check that the unit is still level using spirit level on top
edge of Rear Filter Panel.
Installation