The timer function turns on when press this button on standby mode and can set timer power on
from 1 hour to 7.5 hours by hour. After turning on the machine, press this button to set timer power
off function from 1 hour to 7.5 hours by hour. Release this function can press this button to change
the time and can press "ON/OFF “button directly.
FUNCTIONS OF ALL BUTTONS
ON/OFF
©
COOL
®
Switch on this button to open the air cooler, with a short sound"BI". Meanwhile, functions for
cooling and swing are turned on automatically. High speed wind is starting. To close the aircooler,
switch off the "ON/OFF" button.
This cool function is started automatically after opening the air cooler when the unit have enough
water. Push the button to change into humidification. To press it once more will open cool
function again.
6.
If pack for storage or transportation, please dram the water and make the unit working a few minutes, after
totally dry then pack it, to avoid the peculiar smell.
7.
Don*t keep the plug connecting when long time no using the unit, it will be damaged.
8.
If the supply cord is damaged, it must be replaced by the manufacture or its service agent ora similarly
qualified person to avoid a hazard.
9.
The unit has strong humidity effect, please shut this function in the airtight environment.
10.
Filling water when it is in the low water level.
11.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities or lack of experience and knowledge, unless they have been given supervision or
instruction concerning se of the appliance by a person responsible for their safety.
12.
Children should be supervised to ensure that they do not play with the appliance.
TECHNICAL PARAMETER
SWING L/R
©
SPEED
This function is started immediately after opening the air cooler, shown by the lighted SWING
L/R indicator. Under this condition, the wind board slowly sways form left to right. To stop this
function as well as the indicator, just push this button. Pushing it once more will start the swaying
of wind board once again.
Press this button to change the speed of wind after starting the air cooler. Wind speed
can be changed from high, natural, sleep, low to medium.
Indicator for each wind speed works in need more
比
an 2 second
after changing the speed.
Model
Air Flow
Rate
Voltage
Input
Power
Sound
Pressure
Level
Water Tank
Capacity
Evaporation
Capacity
N. W.
Dimension(mm) L
x W x H
Crown 10i
600m
3
/h
AC220-
240V,50Hz
65W
50dB(A)
10L
1.6L/h
4.9kg
285 X 298 X 638mm
ELECTRICAL SCHEMATIC
Crown 10i
Water level sensor
Water Pump
Swing Motor L/R
Fan Motor
TIMER
o
WATER LEVEL
u
0.5H —►
1H —► 1.5H —► 2H —► 2.5H —► 3H —► 3.5H —>4H
LONG RUN
一
7.5H
一
7H
一
6.5H
一
6H
一
5.5H
一
5H —4.5H
The Led light is white when the tank has water, the Led light is red, and machine also make
voice alarm when there is no water in the Tank. Once the tank is filled with water then press
the cooling button.
