Bona FlexiSand DCS
®
Buffer Manual
10
Bona.com
800.872.5515
Bona FlexiSand DCS
Buffer in General (Cont.)
Handling
The user is expressly obliged only to use the machine in accordance with this manual. If the machine is used in any other manner, this
is solely at the user's own risk. The manufacturer's liability ceases fully in this case.
The machine may not be used in areas where explosive or flammable substances are stored or manufactured (petrol, thinners, fuel, oil,
solvents, etc.). The machine's electrical components and mechanical parts can cause these substances to ignite.
Never work with worn, damaged or incorrect equipment, which can cause damage to the floor.
When the machine is not in use, the power cable must be disconnected from the wall socket in order to prevent damage to the floor
and unlawful use. For transport in lifts, the applicable user and safety instructions must be followed, especially where load capacity is
concerned. In order to prevent unauthorized use of the machine, it must always be stored in a suitable location. Regularly check the
power cable and the machine for wear or aging.
Normal use (cont.)
Risks
1)
Turn the lever counter-clockwise to loosen the handle.
To adjust the foldable handle:
2) Tighten the handle by turning the lever clockwise.
