Bona FlexiSand DCS
®
Buffer Manual
8
Bona.com
800.872.5515
To minimize dust in the environment use a vacuum cleaner intended for wood dust. The air
flow on the vacuum cleaner should be at least 245m³/h. We
strongly
recommend a Bona Dust
Containment System for best results.
Store contained wood dust outdoors in a safe place due to the risk of fire. Never leave contained
wood dust unsupervised.
Always keep a fire extinguisher (ABC-class or water) available.
Take precautionary measures to ensure that the machine is not damaged during transport.
Be careful with cords. Use the correct power cord with the correct length (see accessories list).
Never carry the machine by the cord. Never pull power cords from the machine or wall socket
with strong movements. Protect the power cords against heat, oil and sharp edges. Power cords
longer than 50 ft (15.24m) should not be used.
Remove the power cord from the machine when it is not in use to ensure the machine does not
start unintentionally. Never carry a connected machine. Ensure that the breaker is not on once
the machine is connected to a power socket. Never use the machine if the start handle does not
function as it should.
Inspect the machine regularly. If you discover damaged parts, replace them at once. If necessary,
contact Bona
®
or staff approved by Bona.
Because this construction is in many ways unique, use of other spare parts and accessories than
Bona
original spare parts can cause a risk of personal injury and/or damage to the machine.
Ensure that the machine is always in good condition. Keep the machine clean for better and safer
use. Follow the instructions concerning the replacement of accessories. Inspect the power cords
regularly. Repair or replace defective parts if they are damaged.
Store the machine in a dry and locked area when not in use.
Do not forget to put on the tool before you start the machine. Always check that the sanding
paper is correctly adjusted before you begin sanding.
Keep unauthorized persons away from the work site. Do not allow unauthorized persons to come
into contact with the machine or power cords.
Do not misuse the machine. The machine works better when it is used according to its capacity
and design. Allow the motor to "rest" during periods of heavier use. The motor will cool better,
thus increasing its lifespan.
Safety Instructions (Cont.)
