Bona Edge AMO230009.3, Руководство по эксплуатации, Страница: 16 / 32

16 bona.com
Bona Edge Manual
Machine Adjustment Procedures (Cont.)
If abrasive paper with hole is to be used, proceed as follows:
Abrasive assembly procedures (Cont.)
4)
Ensure the surface of the Velcro disc is clean and
position a new 178 mm diameter abrasive disc.
1)
Ensure the electric cable is disconnected from the power.
2)
Lay the machine carefully on its left side.
3)
Remove the nut and tapered washer (A) with box spanner
NV 17, keeping disc (B) stationary.
5)
Secure the abrasive disc using the nut and tapered
washer, keeping disc stationary.
6)
Check that the sanding disc is centered.
Regularly check the sanding disc.
If the sanding disc is worn out or has become clogged by lacquer or paint, the sanding result deteriorates and the
surface of wood may become discolored.
Only use discs with a diameter of 178 mm.